Woodworking project Make a Wooden Laptop Stand and learn woodworking

http://tinyurl.com/pepu2mw Up to 90%off at Lightake
In this DIY Woodworking project video how-to Make a wooden laptop stand that looks stylish and modern, this woodworking video will show you woodworking techniques including using a router table and applying a finish to complete this project. My Triton Router http://amzn.to/2ehy4nV My Microjig Grr-Ripper http://amzn.to/2e5JMlX To start with we design the template to make the laptop table in Sketchup and then use that to cut out the templates on the scroll saw, you can also use a coping saw or jigsaw for this process. The template is then screwed to the wood blanks and cut out on the router table using a flush cut router bit and a Microjig Grr-Ripper for safety. We then glue the pieces together three at a time, which is easier to align and then sand the inside of the pieces before final assembly and glue up. After final glue up and we have sanded the piece to 1000grit with the power sander we can start the woodworking finishing process. I used Hard Burnishing oil for the finish, which gives a super smooth finish while still retaining that close to the wood feeling. I apply 2 coats of burnishing oil 30 minutes apart and after the last coat before it dries I take some 400 grit sandpaper and rub the surface of the wood which forms a slurry of sawdust and oil that fills an pores in the wood, additional oil can be added to the sandpaper to boost the slurry and add lubrication, using the same process up to 1200 grit sandpaper to give a super smooth finish. After 24-48 hrs the laptop stand can be buffed using a lambs wool cloth. ------------------ Free woodworking project plans in Sketchup and PDF here http://goo.gl/NPuw3T ------------------- Facebook: www.facebook.com/onewoodtools Google+: https://plus.google.com/+OneWoodAuwoodworking Twitter: https://twitter.com/onewoodtools LinkedIn: https://www.linkedin.com/company/one-wood-tools Website: www.onewood.com.au